Skip to content
View in the app

A better way to browse. Learn more.

Ham Radio Base

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.
Ham Radio Base — Education, Resources, Projects and Community
☀ Solar
SFI 99
SN 26
A 6
K 0 Quiet
X-Ray B2.3
Wind 384.8 km/s
Aurora 1
Updated 13:30 UTC HamQSL · N0NBH
Day 80/40m Good 30/20m Good 17/15m Fair 12/10m Poor
Night 80/40m Good 30/20m Good 17/15m Fair 12/10m Poor

Callsign Lookup
_
Vanity Call Signs Available
Enter filters above and click Search.
ⓘ Callsign lookups are in real time via the FCC database. Vanity callsign availability is refreshed daily at 6:00 AM CST. The vanity search may be unavailable for a few minutes during this update.
Live DX spots
Live DX Spots — 70cm via PSKReporter · scroll or pinch to zoom
Band
Mode
Time
Loading map data…
MHz DX Spotter Info
Recent spots —
Select a band above to load spots
Ready — select a band to fetch live spots

Mod_Chad

Moderators
  • Joined

  • Last visited

Everything posted by Mod_Chad

  1. On top band, the receive side is the real limiting factor. If you can't hear him clearly, you can't tell where he is listening, and you can't hear when he calls QRZ or sends a partial callsign. A transmit antenna that is okay but a receive antenna that is quiet will usually beat a stronger transmitter on a noisy receive setup. Also, on low bands, don't feel you have to call every time. Pick the windows where the path is open for both ends, and use the rest of the time to listen and note how he responds. Operators on a quiet gray-line opening often work a lot more stations than in the middle of a noisy night, so the most effective call is often the one you make at the right ten minutes, not the hundredth call over an hour. On etiquette, I'd add two things. Don't give the DX advice over the air, and don't tell other people he is listening somewhere specific unless you're sure. Wrong information can spread through a pileup faster than the DX can correct it. If he has a QSL route or an OQRS, read it before you ask on the air.
  2. On batteries, the key point is the voltage range your rig is built for. A 4S LiFePO4 pack is nominally 12.8 V and is usually charged to about 14.4-14.6 V. That fits many 12 V radios, but check the maximum input voltage in your manual. For example, the KX2 and KX3 documentation lists a maximum supply of about 15 V, so a freshly charged 4S pack is inside the range. Always check the manual for your own radio rather than assuming. LiFePO4 has a flat discharge curve, so voltage stays steady through most of the pack's capacity and then drops quickly near the end. That helps a rig that sags under transmit load, but it also means a voltage meter tells you less about remaining capacity than it would on a lead-acid battery. A pack with a built-in BMS adds protection against over-discharge and short circuits. Even so, fuse the positive lead close to the battery, use polarity-protected connectors such as Powerpoles, and keep the wiring neat. For capacity, calculate it instead of guessing. A rig drawing around 0.1-0.2 A on receive and 1-2 A on a 5 W CW transmit will average far less than its peak, since you spend most of the time listening. Compare a small pack's amp-hours against your planned operating time and add a margin, especially in cold weather, when most lithium chemistries lose usable capacity and charging below freezing can damage the cells. An accurate inline meter or the radio's own voltage display is the easiest way to tell how your station really behaves.
  3. On SO2R, I'd say most of the gain comes from reducing dead time rather than from running two radios at once. When you call CQ on radio 1, the gaps while you wait for callers are the time you can use on radio 2 to look for multipliers or check another band. That only works if the run radio is productive enough that you aren't constantly yanked away. If you're answering a caller every few seconds, there's no room to switch and the second radio just adds confusion. The switching hardware matters more than people expect. An SO2R interface that handles transmit inhibit, audio routing and PTT correctly prevents a lot of mistakes. Good headset audio, with one radio in each ear or a way to latch and unlatch the audio, makes a big difference in how much focus you spend on keeping track of the radios. On the software side, N1MM's SO2R options let you decide how focus follows the radio you're transmitting on. Test those settings before the contest, not during. Station design matters too. Two radios on the same band, or on bands with harmonic or overload problems, can hurt each other's receive. Band-pass filters, stubs and antenna separation are part of the plan, not an afterthought. If the antennas are close together, you may find the second radio is unusable on certain band pairs, and that should shape which bands you pair. For fatigue, plan your rest in advance. A fixed break schedule is easier to stick to than deciding in the moment, especially when the rate is good and you don't want to leave. Hydration and food matter, and so does the practical question of when the bands are weakest. Taking your break during the lowest-rate hours costs less than taking it at peak. SO2R makes fatigue worse because of the extra mental load, so a casual SO2R stretch can feel harder than a steady run on one radio.
  4. On power wiring, most of the mistakes come from a handful of shortcuts. A 50 watt mobile can pull a double-digit current draw on high power transmit, so a cigarette lighter socket is the wrong source. Those circuits are usually thin and shared with other loads, and the plug contacts add resistance that causes voltage drop. Run the positive lead to the battery or a properly rated distribution point, with the fuse as close to the source as practical. The fuse protects the wire, not the radio. If the wire were shorted between the battery and the first fuse, nothing would limit the current, which is why that distance should be as short as you can make it. Use the fuse rating and wire gauge the radio's manual specifies, and don't swap in a bigger fuse because it keeps blowing. A blowing fuse means something is wrong: a short, a bad connector, or a polarity problem. Keep the fuses in both the positive and negative legs of the supplied cable if it came with them, and check the connectors for solid crimps. For the ground, a clean connection to battery negative is the most reliable approach. A chassis ground can work, but it's a common source of noise if the bolt has paint or corrosion under it. For routing, keep the DC leads away from ignition and alternator wiring where you can, and use grommets wherever the cable passes through the firewall so the insulation doesn't chafe. Poor routing and poor grounding also tend to cause the noise problems people ask about later.
  5. On the bureau question, be realistic about timing. It's not a failure if nothing arrives for a long time, since cards sit in sorting queues at both ends. If a confirmation is for an award and not for the wall, I'd start with LoTW or a direct request. If you just want a card for the collection and have no deadline, the bureau is fine and costs little. For direct, make the envelope as easy as possible to answer. Put your callsign and the QSO details on the card, write a clear return address on the SASE, and include whatever return postage the QSL info asks for. A stamp from your own country is no good to a station abroad, which is the reason for green stamps. I'd also avoid sending cash in an envelope that is obviously about ham radio on the outside, so keep the markings low-key. For card design, I'd keep the front as the pretty side and make the back plain and readable. A tiny font or a busy photo background is the usual reason a QSL gets hard to check. If you want a card to be accepted for award checking, clear callsigns, UTC date/time, band and mode on it matter more than the artwork.
  6. One check that is easy to skip: record your own transmit audio, or ask a friend to record it, and listen to it later without the rig in front of you. Real-time monitoring is affected by what you hear in your headphones and in your head. A recording shows whether the compression is pumping the background noise up between words, whether the s sounds are too sharp, and whether the low end sounds boomy. It is also a good way to compare mic positions, because small changes in distance and angle can alter the sound more than a menu setting. On ALC: the rule is not the same for every radio. Some rigs show a safe ALC range, while others also show compression level on a separate meter. If your radio has both, set mic gain first with the processor off, then add compression and re-check, because turning on the processor often raises the average level and changes how the ALC reads. Once you've set it, avoid readjusting it for every band. If one band sounds different, it is more likely a power setting, antenna mismatch or amplifier drive problem than the mic gain.
  7. On practice tests: use them for diagnosis, not as the main way to learn. A good routine is to take a full 35-question practice exam, then look at the questions you missed and sort them by subelement. If your misses cluster in electrical principles, go back to the explanation and work a few Ohm's law problems on paper. If they cluster in regulations, that's a flashcard problem. To avoid learning answer positions, use a tool that shuffles answer order, or cover the choices, say the answer in your own words first, and then check. If you can't explain why the wrong choices are wrong, you don't know it yet. For repeaters and operating practices, these are the usual stumbling blocks: The repeater offset is the difference between its transmit and receive frequencies. You transmit on the repeater's input frequency and listen on its output. On 2 meters the standard offset is usually 600 kHz, and on 70 cm it's usually 5 MHz, but the sign (plus or minus) depends on the frequency segment. Many repeaters also need a CTCSS (PL) tone sent with your signal to open the receiver. If you can hear the repeater but it doesn't respond, a missing or wrong tone is a classic cause. Station identification is another. You identify with your call sign at the end of a communication and at least every 10 minutes during it, and you can do it in plain language or CW. Learn the difference between simplex and repeater operation, what the standard way of calling another station looks like, and why you listen first before transmitting. For RF exposure and safety, learn the logic and not just the numbers: exposure limits depend on frequency, power, antenna type and distance, and some stations must perform an evaluation. For safety, expect questions on grounding, lightning, working around power lines, and tower and ladder precautions. These are mostly common-sense answers once you've read the pool once. One more thing on privileges: Technician operators get all amateur bands above 30 MHz (2 m, 70 cm, 6 m, 1.25 m, and so on) plus limited HF segments. Check the exact segments, modes and power limits against the current FCC Part 97 rules or the ARRL band chart, then make your own chart and quiz yourself on it.
  8. On the phone side, I'd keep the list short. RepeaterBook is useful when you're traveling, but treat any listing as a lead, not gospel. Repeaters change tone, go offline or move to a new site, and the data comes from a mix of coordinators and user submissions. If it matters, listen first for the output, confirm the offset and CTCSS tone, and then transmit. For POTA and SOTA, the spotting pages work fine in a mobile browser, and a grid-locator app or page is a good companion for exchanging locators on VHF and digital modes. Just remember that a 4-character grid like FN31 is a much bigger area than a 6-character one like FN31pr, so use the longer form if the contest or program asks for it. One thing worth adding to the thread: propagation pages are best used to decide when to try a band, not whether to try at all. Solar flux and K-index trends give you a rough idea, but the spotting networks show you what is really open at that moment. If PSK Reporter shows 15 meters lighting up with signals into Europe and the indices look mediocre, believe the spots.
  9. Agreed on the family plan being the part people skip. For households with mixed licenses, a few practical points: put the FRS/GMRS radios on a pre-set channel with a privacy code assigned, but do not treat privacy codes as actual privacy, since they only filter what you hear. Write the channel and code on the back of the radio with a label. Also decide in advance who listens for what. A common split is one person monitoring the weather radio and one person monitoring the local repeater or net, so no one is trying to do both at the same time. If the plan includes a net, keep your traffic short and structured. Give your callsign, location, status and need, and hand it back. Emergency traffic gets crowded quickly, and a clear, brief message is easier for a net control station to handle than a long story. One question for the group: do you keep a dedicated small logbook in the kit, or do you rely on your phone for notes? Phones die, so a pencil and paper seem safer, but I am curious how others handle it.
  10. On noise: the most common culprits are switching supplies, not the generator engine itself. That means AC-DC converters, USB chargers, LED lights, laptop bricks, and MPPT solar controllers. Before you start anything, tune around the bands you intend to use and note the noise floor. Then bring things online one at a time (battery only, then solar controller, then generator and charger, then laptop and lights) and see what each one adds. That tells you what to relocate or replace instead of guessing. Distance is a cheap filter, so put chargers and controllers as far from the antenna and feedline as the cable lengths allow, and add clamp-on ferrites on DC leads where it helps. For feedlines, a common-mode choke at the feedpoint keeps the coax shield from acting as part of the antenna and picking up noise from the shack. A second one near the radio end often helps as well. On 40 m, many people wind several turns of coax through a suitable ferrite core (31 mix is a typical choice for HF). Keep the coax run perpendicular to the antenna wire where practical, and don't coil excess coax right next to the shelter's power gear. Loss is minor at HF with decent coax, but on VHF/UHF a longer run of thin RG-58 will cost you several dB per 100 ft, so use a lower-loss cable like LMR-400 class for any real distance, or keep that antenna mounted close. On grounding, separate the jobs. A single ground rod in dry soil does very little for RF and nothing for a direct lightning strike. What it can do is bleed off static and give you a common bonding point so all gear sits at the same potential. Bond the radios, supplies, and the coax shield entrance together, and keep the generator's grounding per its manual. The real lightning plan is behavioral: watch the sky, lower the mast and disconnect coax when storms approach, and stay away from the antenna. Also, plan the mast location for fall distance, at least the full height of the mast plus a margin from any overhead power line. For setup order, one workable sequence is: site survey and layout (wind direction, generator downwind, mast clear of lines), shelter up and staked, mast and guys, antennas and feedlines with chokes, DC distribution and radios, then the generator and charging. Test on air and check noise before you commit to the layout. Teardown reverses it: power down and disconnect radios first, then lower the antennas, wind coax, collect stakes, and finally the generator after it has cooled. A photo of the stowed kit makes repacking much easier.
  11. On the gear side, one thing to check with paddles is whether your keyer's dit/dah memory and iambic mode match how you squeeze. If you often get an extra dit or dah at the end of a character, try switching between mode A and mode B before blaming your hands. Also look at the paddle itself: contact gap and tension that are too tight cause accidental double elements, and gaps that are too wide cause fatigue. For contests, the decoder and skimmer angle is worth a thought. In a contest, a skimmer-fed spot list can speed up finding multipliers, but the exchange itself still has to be copied correctly. Learn the contest's exchange format ahead of time, set up your function keys for CQ, exchange, TU and a repeat request, and keep the speed at what you can copy reliably, not what looks impressive. If a station asks for repeats, slowing down slightly often saves more time than sending the whole exchange again at full speed. One safety note on QSK: if your radio has a QSK delay or an external amplifier, test it on a dummy load first and make sure the transmit/receive switching is clean before using it on the air.
  12. On breaking in, the right method depends on the mode and the setting. On HF phone, wait for a transmission to end and then give only your callsign, nothing more. If the stations want to include you, they will invite you in. Do not announce a long explanation of why you are there, and do not talk over the middle of an over. On a repeater, you can say your callsign between transmissions when there is a pause. The word "break" is traditionally reserved for urgent or emergency traffic on many repeaters, so if you only want to join a conversation, give your callsign and say you would like to join. A lot of repeater courtesy is also about timing. Leave a second or two of gap before you key up after someone finishes, because other stations may want to add their callsign, and a repeater may also be using that gap for a courtesy tone or for a net controller to take over. Wait for the tone, and avoid "kerchunking", which is keying up without identifying just to test the repeater. If you need to test, say your callsign and that you are checking your signal. For rag chewing, the polite approach is to keep exchanges balanced and leave room for others. If a QSO runs long, it helps to pause occasionally and say that you are listening for anyone who wants to join, especially on a busy band. On a crowded frequency, consider moving, with agreement from the other station, to a clear nearby one. Nobody owns a frequency, however long they have been there, but a bit of consideration goes a long way.
  13. On VHF/UHF the practical split is packet, VARA FM, and P2P. Packet is the most compatible with older TNCs and radios with built-in TNCs. VARA FM can move messages faster when the link quality is good, but it needs a sound-card connection to the radio's data or mic/speaker ports, and the audio levels matter in the same way as on HF. If your FM link is marginal, a good antenna and a clean level setting do more than switching modes. P2P is worth practicing even if you never expect to be out of internet range. With two stations on the same simplex frequency and the same mode, you can pass a message with no gateway. Agree on the callsigns or SSIDs, the frequency, and who is listening. Many failed P2P attempts are a mismatch in one of those, or both stations trying to call at once. For ICS-213 or other forms, do a test message to yourself or a friendly station and confirm what the recipient sees. If they use Winlink Express, they get the form view. If they use a webmail client, they see only the text body. That matters if a served agency expects the form. Also keep a plain-text fallback ready in case the form data doesn't render, and keep it short, since every extra kilobyte costs airtime.
  14. Here are the non-math areas that tend to need deliberate attention. Privileges and bands: Technician gives you all amateur privileges on frequencies above 30 MHz, so VHF and UHF bands like 6 m, 2 m, 1.25 m and 70 cm are fair game. There are also limited HF privileges: CW on parts of 80, 40 and 15 meters, and voice, CW and digital in a portion of 10 meters. Learn the band edges the pool asks about, and the idea of which modes are allowed where, rather than the whole band plan. License terms: Know the term of a license and the grace period after it expires, during which it can still be renewed. Also know the station identification rules, which require giving your call sign at the end of a communication and at regular intervals during it, and know what a control operator is responsible for. Repeaters and operating practices: Understand the difference between simplex and repeater operation, what an offset (the split between a repeater's transmit and receive frequencies) is, and why a repeater may require a CTCSS (sub-audible) tone to open its receiver. Know the usual conventions: listen before you transmit, give your call sign clearly, and keep exchanges short. Know how to run a net check-in and what to do in an emergency. RF exposure and safety: The pool focuses on the factors that determine exposure, which are power, frequency, antenna distance, duty cycle and the antenna's pattern, and on the idea of maximum permissible exposure limits and routine evaluation. Safety questions cover grounding, lightning protection, working at heights and staying clear of power lines when raising antennas. For practice tests, take them in timed, full-length form and track your scores by subelement instead of only the overall number. The passing score is 26 of 35, so a single mock exam can mislead you if you've seen the questions before. Look for sites that shuffle questions and answers and let you review missed topics. When you're consistently well above passing on fresh sets, you're likely ready. Your local volunteer examiner team can tell you what to bring and how sessions are run.
  15. On the multiplier math, one addition: the formula only gives a rough guide, because the cost of getting the multiplier matters too. A multiplier that needs a pileup on a rare station and takes five minutes may not beat staying on a good run frequency. A multiplier that's already spotted and sitting in your bandmap is nearly free. That's why I like having the Available Mults and Q's window and the bandmap visible at the same time, so the cheap multipliers are obvious. For SO2R, the technique is less about hardware and more about timing. A common pattern is to call CQ on radio 1 with a message that has a short gap in it, and use that gap to tune radio 2 for multipliers. When someone answers on radio 1, you switch focus back to it. If you're going to do this, set up the headphones with one radio in each ear (stereo split) and get used to it with a practice session or a low-key contest before a big one. The failure mode isn't gear, it's the operator losing track of which radio is which. Also, a good SO2R controller or footswitch matters, because you don't want to be fumbling with keyboard shortcuts while a station is calling you. Interference is the other practical limit. Two radios on the same band, or on bands that are harmonically related, can seriously desensitize each other without band-pass filters or stub filters, and antenna separation helps too. Plan this before the contest, not during it. Rules differ by category and contest, so check how your entry class treats SO2R and spotting.
  16. ARISS announced a live ham radio contact between students at École Secondaire du Sommet in Halifax, Nova Scotia, and the ISS. It is scheduled for Friday, 13 November at 18:07 UTC. The contact runs via the VK4ISS telebridge, with crew audio on 145.800 MHz FM in Australia. The scheduled crewmember is Joshua Kutryk, KJ5BFU. The announcement gives no end time.Location: École Secondaire du Sommet, 500 Larry Uteck Blvd, Halifax, NS B3M 0E6, Canada (address from AMSAT-ON's listing). The contact is by telebridge via VK4ISS, and the downlink can be heard on 145.800 MHz FM. Organizer: ARISS (Amateur Radio on the International Space Station) Source: Event information
  17. The order that usually works is: study, get your FRN, find a session, take the test, then wait for the license to appear in the ULS. On the FRN: the FCC assigns it when you register in CORES (the Commission Registration System). It's just an ID number that ties you to your FCC records. Register early, because you'll need to give it to the VE team on the day, and they put it on your application. The ULS (Universal Licensing System) is where your license lives afterward. Once the VEs file your passing result through their coordinating organization (the VEC), the FCC grants the license, and your call sign shows up in a ULS license search. Look yourself up there rather than assuming it went through. Also keep your CORES login details somewhere safe. People forget them and then struggle when it's time to update an address or upgrade. For studying, most people do best with both. A book like the ARRL license manual explains the why: what a duty cycle is, why a dipole is cut to a certain length, how repeater offsets work. That makes the questions easier to remember. HamStudy and similar apps then drill the actual question pool with spaced repetition. Take full practice exams near the end. The Technician test is 35 questions and the pass mark is 26 correct, so aim to score well above that on practice runs, not right at the line. One caution: the question pool is revised on a multi-year cycle. Make sure your book edition or app is set to the pool that's in effect on your test date. Outdated material is a real trap.
  18. One thing worth adding to the buyer's checklist is to look at the connectors and cables as carefully as the radio. Worn microphone jacks, bent pins on accessory ports, and cracked power connectors are easy to miss in a crowded aisle, and they can be annoying or expensive to replace. Ask whether the original mic, power cable and any control head or mounting hardware are included. For mobile rigs, a missing separation kit can be a big deal. Also decide on your budget and walk-away price before you start browsing. Hamfests make everything look like a bargain. A quick lap of the whole flea market before buying anything gives you a feel for typical prices, and you can compare condition between sellers. If you're after a specific radio, check the manufacturer's known quirks and common failure points beforehand so you know what to look for.
  19. I'd split the pool into three buckets: calculation questions, concept questions, and rules questions. Each needs a different kind of studying. Calculation questions are usually one or two steps, and a few relationships cover a large share of them. Inverting op amp gain is -Rf/Rin, so 100 kΩ feedback with a 10 kΩ input resistor gives a gain of -10. Non-inverting gain is 1 + Rf/Rin, so the same resistors give 11. Filter Q is center frequency divided by bandwidth, so a 7.1 MHz filter with a 100 kHz bandwidth has a Q of about 71. FM modulation index is peak deviation divided by modulating frequency, so 3 kHz deviation with a 1 kHz tone gives an index of 3. Write each one out by hand a few times with different numbers. That sticks better than rereading. Concept questions reward understanding over memorizing. Know what makes an oscillator oscillate: positive feedback with loop gain of at least one and the right phase shift. Know how Colpitts, Hartley and Pierce circuits differ (capacitive divider, tapped inductor, crystal). Know why a Class C amplifier is efficient but needs filtering, and why an SSB signal takes less bandwidth than AM. If you can explain these in a sentence or two, the distractor answers become much easier to eliminate. For the Smith chart, you don't need to plot anything, but learn the landmarks. The center is a perfect match (normalized impedance 1 + j0). Moving along a lossless line rotates the point around the chart, and one full revolution is a half wavelength. The outer edge represents pure reactance. A few diagram-reading questions follow naturally from that.
  20. For hunting, the exchange is short. Send your callsign once the activator is calling for stations. Give a signal report and your state or province if asked, and don't add extra chatter during a pileup. Activators trying to reach 10 QSOs are working through a queue, so short and clear is considerate. If you are also in a park, that's a park-to-park contact (P2P). Say so, because it's welcome and usually gets answered quickly. On rules, one point is easy to miss: the POTA program rules and the park's own rules are separate. A valid POTA spot is not permission to set up wherever you like. Look up the park's regulations or the land manager's contact before you travel, especially for antenna supports, drones, camping, and vehicle access. A park website may differ from the POTA listing, and the land manager's rules take priority. For two-fers, use the POTA map or the park pages to see which references share the location, and decide in advance which one you are physically in. If part of an area is only in one reference's boundary, set up in the overlap so every QSO belongs to all the parks you log it for.
  21. You have the numbers right: 35 questions, 26 correct to pass. That is about 74 percent, so you can miss nine. You don't need perfection, but you can't skip a whole topic either. The exam is drawn from a published question pool, so check which pool is current before you buy a book or app, because an outdated study guide can contain questions that are no longer used. On sub-bands, memorize the pattern first and the edges second. On most HF bands the lower portion is CW and digital, and the upper portion adds phone. Technicians already have limited HF access: CW on 80, 40, and 15 meters, CW/RTTY/data on 10 meters, and SSB on the lower part of 10 meters. General opens up much more, including parts of 160 through 10 meters, the 60 meter channels, and 30 meters, which is CW and digital only with a lower power limit. The exam tends to ask things like whether a given frequency is available for phone to a General on a given band, or which bands have special restrictions. Making a one-page chart from the FCC Part 97 privileges table and then quizzing yourself on it works better than rereading it. Always verify the edges against the current rules, not just a memory aid. For propagation, learn the reasons rather than just the answers. The D layer absorbs lower HF frequencies in daytime and fades at night, which is why 80 and 40 meters get better for distance after dark. The MUF is the highest frequency that will be refracted back for a given path. Higher solar flux generally supports the higher bands, and grayline propagation helps along the day/night boundary. If you understand why, many of the questions answer themselves. For electrical principles, expect Ohm's law, power calculations, and a bit of RMS, peak, and PEP. Know that 3 dB is roughly double (or half) power and that 6 dB is roughly four times. You don't need heavy math, but you do need to be comfortable rearranging simple formulas without a lookup table.
  22. On the net control side, a short opening script goes a long way. State the net name, its purpose, whether it is directed or open, and how you want check-ins. A line like "stations with emergency or priority traffic only" tells people what to do right away. Then call for check-ins in a consistent pattern, such as by call area or by suffix, and repeat the call sign back as you log it. If you only get a partial call, ask for a repeat with phonetics rather than guessing. A wrong call in the log causes trouble later, especially on a net that files reports. For traffic nets, the content is only as good as the message format. Preamble, address, text and signature need to be read at a pace the receiving station can copy, and the word count should match. For ARES and SKYWARN nets, discipline matters more: keep reports short, state the location and the observation, and leave the commentary off the air. Net control can also say plainly when the net is moving from open check-ins to a directed mode, so that people with routine business know to wait. At the end, read out the number of check-ins, thank the stations that helped relay, and give the time and frequency of the next session. Many nets forget to repeat that last part.
  23. Picking up the rest, with a couple of cautions. RF exposure: §97.13(c) says that if your station's power and antenna configuration exceed the thresholds in the FCC's RF exposure rules (§1.1307(b)), you must perform a routine evaluation. The thresholds depend on the band and are expressed in terms of ERP, so a low-power station may fall under an exemption but a high-power or high-gain VHF/UHF station may not. The evaluation can be done with the FCC's OET Bulletin 65 methods, published calculators, or measurements. You need to consider both your own household (uncontrolled environment) and any place people can reach near the antenna. Mode and duty cycle matter, since SSB, CW, and FM have different average power. Evaluation doesn't mean a license filing. It means you are responsible for being able to show the station meets the limits in §1.1310. For practical safety, keep the antennas well away from where people stand or sit. Spurious emissions (§97.307): the rules set attenuation limits that depend on band and power. The HF requirement for newer equipment is at least 43 dB below the mean power of the fundamental, and VHF/UHF stations above certain power levels have tighter limits. The rule applies to your station as a whole, not just the radio as it came from the factory. Common causes of problems are an overdriven amplifier, too much audio or ALC action, a missing or wrong low-pass filter, and an amp used outside the band it was designed for. If you add an amplifier, check the output on a spectrum analyzer or SDR with an appropriate attenuator and compare it to the limit, and don't just assume it is fine. Control and auxiliary operation: every amateur station needs a control operator (§97.103, §97.105). The licensee is responsible for proper operation unless the licensee designates someone else. The control types are local, remote, and automatic (§97.109). Automatic control is only permitted for specific station types such as repeaters, auxiliary stations, and beacons, with rules for digital stations too. A repeater control operator must be able to shut the repeater down if it malfunctions. Auxiliary stations (§97.201), for example links and control links, are limited to certain bands and segments. For a repeater, also read §97.205 on repeater station rules and the coordination provisions. Enforcement: the FCC's Enforcement Bureau can issue warning notices and notices of violation, and in serious cases can pursue forfeitures or license action. Deliberate interference, ID violations, and unlicensed operation draw more attention than minor paperwork problems. Volunteer monitoring programs exist, but they do not have FCC enforcement authority. License term and renewal: an amateur license is valid for 10 years (§97.25). You can file a renewal in the ULS within 90 days before expiry. If you miss the date, a 2-year grace period (§97.21) lets you renew, but you can't transmit during it. After the grace period, the license is gone and you would need to take the exam again. Keep your mailing address and email address current in ULS. Fee requirements have changed over time, so check the FCC's current fee schedule before filing.
  24. One thing worth separating is the type of use. For local FM simplex and repeater work, a vertical omni with moderate gain is usually the sensible choice. For weak-signal SSB, a horizontally polarized yagi is the norm, and for FM satellites you want something light and directional. Trying to cover all of these with one antenna ends in compromise. On satellites specifically, circular polarization is not just a nicety. Since the satellite's orientation relative to you changes during a pass, a linear antenna can show deep fades. Crossed yagis fed for RHCP, or a simple directional antenna you can rotate in polarization by hand, helps. Also, for the satellite downlink on 70 cm, losses in coax and connectors matter just as much as at the repeater, so keep the run short and use N-type or another good connector at the antenna. And on the SWR point: if the SWR meter looks great with a long thin coax run, test a short piece of the same cable through a dummy load. The reading will usually look 'good' because of cable loss, not because the antenna is efficient. An antenna analyzer at the feedpoint, or a known-loss check, is the quickest way to separate a bad match from a lossy line.
  25. Good breakdown. I would put filtering at the top of the list for anyone using an HT near a city. Many "my radio is deaf" complaints are really overload from FM broadcast, pagers or a nearby repeater site, and unlocking more frequency range does nothing about that. A simple bandpass filter for the band you use is cheap compared with most internal mods, though you need to account for insertion loss, particularly on 70 cm. On TCXO, I'd add a reminder that you can't judge the result by ear. Find a reference, whether that's a counter, a known stable signal, or a calibrated SDR with the usual caveats, and measure before and after. Otherwise it's easy to spend money on a fix for a drift problem that doesn't exist. One more point on the legal side: "the radio can do it" and "I'm allowed to do it" are different questions. That applies to MARS and CAP radios just as much as to expanded-TX hand-me-downs.

Affiliate Disclosure: As an Amazon Associate, Ham Radio Base earns from qualifying purchases. Some links throughout this website may be affiliate links. If you purchase a product through one of these links, we may earn a commission at no additional cost to you. Your support helps us continue creating free articles, tutorials, reviews, and resources for the amateur radio community. N0TLB © Ham Radio Base - Powered by the Ham CQ DX Community. All rights reserved.

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.